Next generation dimmer pack with eight output sockets.
The ADJ DP-415R is a compact, portable 4-channel DMX
dimmer/switch pack that has eight 3-prong 15 Amp Edison socket (2
for each channel) allowing you to be able to control up to 8
fixtures. The pack has a 4-button digital display menu and is RDM
(Remote Device Management) compliant.
The hanging bracket is reversible to give you flexibility when
installing this product to either a hanging bracket or on a truss
and it can also be used with a clamp. It is also wall mountable.
Also to make this product easier to use we incorporated LED "ON"
indicators and a DMX signal indicator LED is also incorporated so
that when DMX signal is present, the LED illuminates.
The original DP-415 dimmer pack has been a staple of the ADJ
range for more than a decade. Offering a cost effective DMX dimming
solution for use with PAR cans, pin spots and other stage lighting
fixtures, it has proved to be a reliable workhorse for mobile
entertainers and performers as well as for fixed installations in a
wide variety of performance spaces. The new DP-415R retains the
concept of the original - a low-cost, compact and flexible dimmer -
but improves on it with new features and functions that make it
even more versatile and easy to use.
The DP-415R is a four-channel dimmer pack that also doubles up
as a switch pack, which means that it can not only be used to
control incandescent-lamp-based lighting such as par cans but it
can also be used to remotely switch on and off effect lights and
other standalone equipment. What's more, as an improvement to the
original version, it is possible to alter the dimming/switching
functionality for each channel individually, which means that a
single unit can be used simultaneously as a dimmer for some
channels and switcher for others.
Eight output sockets (two for each channel), are fitted to the
sides of the unit, which means that it can be used to control up to
eight individual fixtures. A total load of 15A (1,800W) is
supported, with a maximum of 5A (600W) for each individual channel.
The US version has 3-prong Edison sockets for output, while the
European version features IEC outlet sockets.
A trailing cord provides power to the DP-415R, which is
connected to an on/off rocker switch. Status LEDs on the front of
the unit display the current dimming level for each of the output
channels, while an additional LED indicator is also incorporated to
show when a DMX signal is detected.
DMX input and output is via standard 3-pin XLR sockets, while
a 4-character LED menu screen with four corresponding control
buttons allows for easy DMX addressing and mode selection (an
improvement from DIP switches on the original model). The new unit
also supports the RDM (Remote Device Management) protocol that
allows compatible DMX control systems to set a fixture's DMX
In addition to use as a DMX-controlled dimmer/switch pack, the
DP-415R can also operate as a standalone chaser. It is
pre-programmed with 16 internal chase patterns, which can each be
set to run at a user selected speed of between (approximately) one
step every 30 seconds and one step every 1/10th of a second.
The unit is fitted with a flexible reversible hanging bracket
which can be used to mount the DP-415R in a variety of different
ways. It can be attached directly to a lighting T-bar, fitted to a
clamp for truss-hanging or mounted directly to a wall.
With measurements of 10.25" x 8.25" x 3" / 260 x 209 x 76mm (L
x W x H) and a weight of 6 lbs. / 2.72 kgs, the DP-415R is easily
portable and takes up minimal storage and transportation space. Its
compact design and flexible mounting bracket also means that it is
unobtrusive when mounted on a truss or tripod, which allows for
short cable runs compared to larger dimming systems that need to
remain on the ground.
Weather you're a mobile entertainer looking for a flexible
dimming/switching solution to add into your rig or an installer
specifying and supplying lighting systems for leisure venues or
houses of worship, the DP-415R is sure to meet your requirements.
It is a versatile, reliable and affordable solution for dimming or
switching lighting that is both compact and powerful.
The original DP-415 is an established ADJ classic and, now,
the updated DP-415R is set to continue its legacy for many more
years to come.
- Compact 4-Channel DMX Dimmer/Switch Pack
- 2x 3-prong Edison plugs per channel (8 total plugs)
- On/Off power switch
- 3-pin DMX In/Out
- Digital Display with 4 Menu Control Buttons
- Supports RDM (Remote Device Management)
- Assign as a dimmer pack or switch pack
- Changeable hanging bracket to hang on truss
- Wall mountable
- LED "On" indications
- Max Power: 15A Total, 5A per channel (120V)
- Dimensions (LxWxH): 10.25" x 8.25" x 3" / 260x209x76mm
- Weight: 6 lbs./2.72 kgs.
Works also as a standalone chaser with 16 internal chase