Furman M-8S 120V/15A Standard Power Conditioner with Sequencer m-8-s
Install a Furman M-8S in your rack, and the eight outlets in the rear panel will power up in sequence and protect all your equipment up to a 15-amp load.
Merit M-8S Power Sequencer is the perfect low-cost AC power solution for any rack mount system where power sequencing is desired.
Install an M-8s in to the top slot of your rack, and the six delayed outlets in the rear panel will power up sequentially and protect all your equipment up to a 15-amp load.
- Power Sequencing: Prevents excessive inrush currents, Six sequenced rear panel outlets (in three groups), two unswitched rear panel outlets, and one front panel unswitched outlet, Momentary and maintained sequencing via rear panel terminal block or front panel switch (momentary only).
- Noise Filtration: Noise filtering to reduce radio frequency and electromagnetic interference.
- Surge Protection: Ensures equipment stays safe.
- 9 Total Outlets: Eight rear panel outlets and one front panel convenience panel outlet.
- 15 Amp Rating: 15 amp rating, with circuit breaker.
- "Protection OK" Indicator: Front panel indicator LEDs for Outlet Banks, Protection OK and Power Status.
- Wall Wart Spacing: Rear outlets have been spaced to accommodate even the bulkiest of wall warts and adapters.
- All settings and configurations available on rear panel.
- Family: Merit Series
- Line Voltage: 120 (Volts)
Includes 3 delayed outlet banks - each with 2 outlets - plus 2 unswitched outlets.