All items ship from Canada
Laney CUB-SUPER12 15W 1x12" Tube Guitar Amplifier Combo cub-super-12
The Laney CUB-SUPER12 is a great sounding boutique style all-tube amp.
Featuring an ergonomic, straight ahead single channel, with three band EQ plus a dynamic, footswitchable BOOST function. The CUB-SUPER12 features a footswitchable on-board reverb powered by the highly acclaimed spring reverb algorithm from the Black Country Custom SECRETPATH pedal. Loaded with a custom designed and voiced HH 12" driver the CUB-SUPER12 delivers 15 watts of pure CLASS AB tube and features the ability to be run at <1 Watt by plugging into the <1 Watt input. The CUB-SUPER12 is loaded with 3 hand selected 12AX7 tubes in the preamp and a pair of EL84 output tubes in the output section. The CUB-SUPER12 is loaded with an insert style FX loop and external speaker socket.
Features:
- Single channel 15 watt Class A tube amp combo
- 2 x 12AX7 preamp tubes, 2 x EL84 output
- 12" HH driver
- 3-band EQ, 1-watt attenuated input, foot-switchable boost, reverb, external speaker out and FX loop
Class A/B
A Class A/B power section is based on the notion that music is a
waveform and linear in nature - i.e. you only get a +ve section
followed by a -ve section, you never get a +ve and -ve occurring at
the same time. In a Class A/B amplifier, the input signal is split
into the +ve and the -ve sides of the waveform and each respective
part is sent to a separate tube or tubes and amplified
accordingly.
Selectable Power: 15W Or Less Than 1W
Allows you to drive the output stage of the amplifier harder at
reduced output levels should you need to use the unit in situations
where full volume is not appropriate.
On-Board Reverb
On-board studio quality reverb. Reverb gives you a sense of the
space that you are in. A dry guitar signal can sound a little dull.
Adding the right about of reverb provides the guitar signal with
ambience and brings it to life.
FX Loop
FX loops are important as they allow you to add effects to the
signal path in a specific place between the preamp and the output
section on an amplifier. This is where FX loops are important as it
allows you to put time-based FX after the distorted preamp section.
For example, delayed distortion sounds different to distorted delay
- try it.
Specs:
- Wattage: 15W
- Type: Combo
- Tube or Solid State: Tube
- Number of Preamp Tubes: 2
- Preamp Tube Type: 12AX7/ECC83
- Number of Power Tubes: 2
- Power Tube Type: EL84
- Number of Channels: 1
- Footswitchable: Yes
- Number of Inputs: 1
- Speakers: 1x12"
- Cab Back Panel: Open-back
- Speaker Impedance: 8 ohms
- Cab Angle: Slant
- Channel 1: Three-band EQ, plus gain and volume
- Reverb: Yes
- Boost: Yes
- Other: Footswitch: Yes (sold separately)
- Effects Loop: Yes
- Reverb: Yes (digital)
- External Speaker Output: Yes
- Height: 15.7"
- Width: 17"
- Depth: 9.2"
- Weight: 26 lbs
- Country of Origin: China
15 watts of pure tube tone. Order today.
