Presonus Eris-E5XT 2-Way Active Studio Monitor with Wave Guide eris-e-5-xt


Reach down to an astonishing 48 Hz without the need for an extra subwoofer.
The Presonus Eris-5XT is an Eris Series 2-Way Active Studio Monitor with Wave Guide.
Our best-selling studio monitors just got better.
With their smooth, accurate frequency response; powerful
amplification with tons of headroom; and acoustic tuning functions
that ensure you always get the best sound... it's no wonder that
the original Eris®-series studio monitors have been a runaway hit
since their introduction. The Eris E5 XT is a substantial update to
a lauded classic. Deeper lows and a wider, more controlled sweet
spot (thanks to its new EBM wave guide design) mean that our
best-selling studio monitors just got even better.
Studio speakers with a wide sweet spot.
We outfitted the Eris XT studio monitors with a new EBM (Elliptical
Boundary Modeled) wave guide designed by none other than Hugh
Sarvis of WorxAudio, the mind behind our award-winning CDL
loudspeakers and lauded R-Series monitors. The result? A superior
high-frequency response and wider 100-degree horizontal dispersion
to create a broader sweet spot. It's ideal for group listening and
collaboration-while narrow vertical dispersion reduces reflections
from your desk. Silk-dome tweeters ensure snappy, accurate
transient reproduction.
Lows that go lower.
The familiar woven composite low-frequency driver still offers
Eris' signature tight, clear bass; plenty of punch and no flub.
Eris E5 XT studio monitors sport a ported enclosure that is larger
than that of their predecessors, allowing them to reach down to an
astonishing 48 Hz. That's 10 Hz below previous models-with no
subwoofer required!
Set up your studio monitors for your room.
We know modern recording studios can be anywhere from a spare
bedroom to a multi-million dollar facility; that's why every studio
monitor we make is equipped with controls that ensure the flattest
response in your mix environment. Acoustic tuning controls allow
you to configure the Eris E5 XT perfectly for your room-you get
Low-cut, Mid, and High controls, as well as 3-way acoustic space
tuning that allows you to easily compensate for the sonic
consequences of speaker placement against a wall or in a
corner.
Studio monitor connections.
It's easy to feed audio to your Eris E5 XT studio monitors from an
audio interface, mixer, monitor controller, or almost any other
line-level source. Eris E5 XT monitors provide balanced XLR,
balanced ¼" TRS, and unbalanced RCA line-level inputs. You'll have
no problem hooking your Eris speakers up to virtually anything.
Accuracy defined.
Suitable for both home recording studios and professional mix
engineering, the Eris XT studio monitors combine sterling audio
quality with the flexible tuning and connectivity you've come to
expect from PreSonus. It's Eris, remastered.
Components and construction:
- 5.25-inch woven composite low-frequency transducer
- 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
- Front-firing acoustic port for superior bass-frequency reproduction
- Optimized, resonance-suppressing internal bracing
- 102 dB maximum continuous SPL
User controls:
- HF Adjust (±6 dB, continuously variable)
- Midrange Adjust (±6 dB, continuously variable)
- Acoustic Space settings (flat, -2, -4 dB) for accurate mixing contour
- Highpass filter (Off, 80 Hz, 100 Hz)
Power and safety:
- 70 watt, Class AB biamplification
- RF interference, output current limiting, over-temperature, transient, and subsonic protection
- Amplifier "soft start" feature eliminates popping on power-up
- Internal power supply with IEC connector
- Power switch with on/off LED
Inputs and outputs:
- Balanced XLR/¼-inch
- Unbalanced RCA inputs
Specifications:
- Power: 100-120V ~50/60 Hz or 220-240V ~50/60 Hz
- Cabinet: Vinyl-laminated, medium-density fiberboard
Inputs:
- 1- Balanced XLR
- 1- Balanced ¼" TRS
- 1- Unbalanced RCA
Performance:
- Frequency Response: 48 Hz - 20 kHz
- Crossover Frequency: 3 kHz
- LF Amplifier Power: 45W
- HF Amplifier Power: 35W
- Peak SPL (@ 1 meter): 102 dB
- LF Driver: 5.25"
- HF Driver: 1" silk dome
- Input Impedance: 10 kΩ
- Dispersion: 100 degrees horizontal by 60 degrees vertical
User Controls:
- Volume Range: A-type taper
- MF Control: -6, 0, +6 dB
- HF Control: -6, 0, +6 dB
- Low Cut: Flat, 80 Hz, or 100 Hz
- Acoustic Space: Flat, -2 dB, or -4 dB
Protection:
- RF interference
- Output-current limiting
- Over-temperature
- Turn-on/off transient
- Subsonic filter
- External mains fuse
Physical:
- Width: 8" (203.2 mm)
- Depth: 9" (228.6 mm)
- Height: 11" (279.4 mm)
- Weight: 11 lbs (4.99 kg)
Excellent choice for your home recording studio or a more professional environment.