Ibanez SR505EBAB SR Series Black Aurora Burst 5 String RH Bass Guitar sr-505-e-bab
The Ibanez SR505EBAB SR Series Black Aurora Burst 5 String RH Bass Guitar has a Accu-cast B500 bridge and 24 frets.
Rosewood fretboard
Rosewood provides a well-balanced solid tone with a focused mid
range.
Accu-cast B500 bridge
The Accu-cast B500 bridge has adjustable saddles for variable
string spacing by +/- 1.5mm, answering every bassist's specific
string spacing needs.
Bartolini® BH2 pickups
The Bartolini® BH2 pickups provide a tight bottom-end, punchy
mid-range, and smooth response. The dual-coil style configuration
maximizes articulation and a long blade pole piece widens the
magnetic field, providing balanced string-to-string pickup
response.
Ibanez Custom Electronics 3-band EQ w/EQ bypass switch & Mid
frequency switch
Ibanez Custom Electronics 3-band EQ is our latest refinement on the
concept of simple, straightforward, no-nonsense EQ control. The
Boost and Cut for the Mid Control are each centered on slightly
different frequencies, an innovation that delivers a preset range
of the most favorable bass tones.
Precision tonal control, including a switch to choose passive-only
operation. When the EQ bypasses activated, the treble tone control
knob becomes the global tone control for the passive circuit.
Controls
With the bass held in the playing position, there are three small
knobs located towards the lower edge of the body. Directionally,
from the lower bout towards the neck these knobs control treble
boost/cut, mid boost/cut, and bass boost/cut knob. Above these are
two larger knobs closer to the bridge. Of these, the knob closest
to the end of the body is the pickup balance, and the knob located
towards the neck is the volume knob. There are two switches on this
bass. The switch closest to the lower edge of the body is a 3-way
mid frequency switch. When the switch is in neck position, mid
boost peak is at 250Hz. When the switch is in center position, mid
boost peak is at 450Hz. When the switch is in bridge position, mid
boost peak is at 800Hz. The other switch closer to the middle of
the bass is the EQ bypass switch. When the switch is in neck
position, the EQ is off. When the switch is in bridge position, EQ
is on. When EQ is off, the treble knob works as a passive tone
control knob.
Frequency Response
The bass boost/cut frequency curve has a peak at 20 Hz, the
variable width becomes smaller toward the high range, and the
variable width becomes zero at about 1000 Hz. The variable range of
the peak frequency is approximately ±15 dB. The treble boost/cut
frequency curve draws a mountain-shaped curve with a peak at around
10,000 Hz and zero variable range around 100 Hz. The variable range
of the peak frequency is approximately ±15 dB. The mid-boost/cut
frequency curve creates a bell-shaped curve that peaks at a
specific frequency, and the variable range becomes zero near 20 Hz
and around 10,000 Hz. The frequency peak can be switched to 700,
450 and 250 Hz. The variable range of the peak frequency is
approximately ±15 dB.
Specifications
- neck type: SR5/5pc Maple/Walnut neck
- top/back/body: Okoume body
- fretboard: Rosewood fretboard/Abalone oval inlay
- fret: Medium frets
- number of frets: 24
- bridge: Accu-cast B505 bridge
- string space: 16.5mm
- neck pickup: Bartolini® BH2 neck pickup (Passive)
- bridge pickup: Bartolini® BH2 bridge pickup (Passive)
- equaliser: Ibanez Custom Electronics 3-band EQ w/ EQ bypass switch (passive tone control on treble pot), 3-way Mid frequency switch
- factory tuning: 1G,2D,3A,4E,5B
- strings: D'Addario® EXL165+.130
- string gauge: .045/.065/.085/.105/.130
- hardware color: Black
Neck Dimensions
- Scale: 864mm
- a: Width: 45mm at NUT
- b: Width: 68mm at 24F
- c: Thickness: 19.5mm at 1F
- d: Thickness: 21.5mm at 12F
- Radius: 305mmR
Other Features
- Recommended Case: MB300C
This bass has medium frets and a 16.5mm string space.
Discontinued, B-stock and otherwise refurbished items have a limited warranty. Please see manufacturer for details.