Ibanez SRC6MSBLL SR Series Multiscale Black Stained Burst Low Gloss 6 String RH Bass Guitar src-6-ms-bll
The Ibanez SRC6MSBLL SR Series Black Stained Burst Low Gloss 6 String RH Bass Guitar has a Bartolini BH2 pickups and Custom Electronics.
5pc Jatoba/Walnut neck
The 5pc Jatoba/Walnut neck provides tonal clarity and superior
attack.
Multi scale
The multi scale construction equalizes tension of each string and
it helps to create a more "alive", open tone. But the design also
improves player comfort. The multi scale construction ergonomically
coordinates with the way a player's hand angles as it moves up and
down the neck, facilitating quick, comfortable playing action.
Rosewood fretboard
Rosewood fretboard provides a well-balanced solid tone with a
focused mid range.
Okoume body
The Okoume body provides a bright and solid sound.
Bartolini® BH2 pickups
The Bartolini® BH2 pickups provide a tight bottom-end, punchy
mid-range, and smooth response. The dual-coil style configuration
maximizes articulation and a long blade pole piece widens the
magnetic field, providing balanced string-to-string pickup
response.
Mono-rail bridge
Designed for both stability and sustain, the innovative Ibanez
Mono-Rail bridge minimizes cross-talk between strings
Ibanez Custom Electronics 3-band EQ w/EQ bypass switch(passive
tone control on treble pot) & 3-way Mid frequency switch
The Ibanez Custom Electronics 3-band EQ is our latest refinement on
the concept of simple, straightforward, no-nonsense EQ control. The
Boost and Cut for the Mid Control are each centered on slightly
different frequencies, an innovation that delivers a preset range
of the most favorable bass tones.
The EQ bypass control offers precision tonal adjustments, including
a switch to choose passive-only operation. When the EQ bypass is
activated, the treble tone control knob becomes the global tone
control for the passive circuit.
The 3-way Mid frequency switch allow players to change the mid-tone
between 250, 450, and 700 Hz.
Controls
With the bass held in the playing position, there are three small
knobs along the lower edge of the body. From the lower bout towards
the neck they are; Piezo tone knob, magnetic pickup treble knob,
and magnetic pickup bass knob. There are three knobs, above the
smaller knobs, that are closer to the bridge. From the lower bout
towards the neck they are; piezo volume knob, magnetic pickup
balance knob and magnetic pickup volume knob. There is a 3-way
pickup selector switch very close to the end of the body, near the
input jack. When the switch is in neck position, the piezo pickup
is selected. When the switch is in center position, both piezo and
magnetic pickups are selected. When the switch is in bridge
position, magnetic pickup is selected. You can adjust piezo gain
for the 5th, 6th, and 7th string with the trim pots located at the
back panel. To boost the gain, turn the trim pots clock wise with a
Philips head screwdriver. To cut the gain, turn the trim pot
counter clockwise. The trim pots are lined up in order of the
strings.
Frequency Response
The bass boost/cut frequency curve has a peak at 20 Hz and a
variable width that decreases toward the high range, and a curve
that the variable width becomes zero at approximately 1000 Hz. The
variable range becomes slightly larger in the high range than
around 1000 Hz, but it becomes zero again near 5000 Hz. The
variable range of the peak frequency is approximately ±15 dB. The
treble boost/cut frequency curve creates a bell-shaped curve with a
peak around 10000 Hz and zero variable range around 100 Hz. The
variable range of the peak frequency is approximately ±15 dB.
Specifications
- neck type: SRC6/5pc Jatoba/Walnut neck
- top/back/body: Okoume body
- fretboard: Rosewood fretboard/Abalone Step off-set dot inlay
- fret: Medium frets
- bridge: Mono-rail bridge
- string space: 10.8mm
- neck pickup: Bartolini® BH2 neck pickup (Passive)
- bridge pickup: Bartolini® BH2 bridge pickup (Passive)
- equaliser: Ibanez Custom Electronics 3-band EQ w/EQ bypass switch (passive tone control on treble pot), 3-way Mid frequency switch
- factory tuning: 1E,2B,3G,4D,5A,6E
- strings: D'Addario® EXL156
- string gauge: .024/.034/.044/.056/.072/.084
- hardware color: Cosmo black
Neck Dimensions
- Scale: 762 mm- 724mm
- a: Width: 42mm at NUT
- b: Width: 58mm at 22F
- c: Thickness: 19.5mm at 1F
- d: Thickness: 21.5mm at 15F
- Radius: 400mmR
Other Features
- Recommended Case: MRB350C
- Ibanez machine heads
This bass comes with Cosmo black hardware.
CITES/LACEY Information
As of Dec. 31, 2021 many products have been affected by the Lacey Act. All manufactured products containing wood of any species, are no longer eligible to ship outside of Canada. This change affects many types of musical instruments and products containing wood of any type. Guitars, drums, drumsticks, and wood based hardshell cases are amongst many products that are affected by new laws aimed at protection of wood species across the globe. If you have a question or a concern regarding a product shipping outside of Canada, please call, email or chat with our team to get more information.